Die 5 besten Mining-Grafikkarten für Ethereum und Bitcoin ...

Why the 3070, 3080, and 3090 are going to spike in price.

Why the 3070, 3080, and 3090 are going to spike in price.
I was one of the lucky few to get a 3080 on release and I have stressed tested everything I can think of out of this card. It is absolutely a monstrosity. I happened upon an article saying the 3080 and 3090 have terrible MH/s(hashrate/mining rate for mining bitcoin). I decided to see what this card can do and happened upon some interesting data. So I decided to use Nicehash to test the GPU mining profitability(I'm sure its off by some margin but its a good start.) After running for a day and with the correct downclock I can keep my temperature stable. Increasing the power limit past 70 yield marginal hashrate at the expense of a significant amount of power(it becomes less profitable). With my current electric bill(around 11 cents per mwh) I make 2.20$-2.40$ a day after electric expense. A more sophisticated miner could make more with the right software(linux) and lower electric rate. Just wanted to share my opinion I could be wrong, let me know what you guys think.
https://preview.redd.it/tw581u0n6yo51.png?width=1056&format=png&auto=webp&s=7cdf81f7a9740faf0b59747c0d1a7495faaa9b19
submitted by XxBigPimpJuniorxX to pcmasterrace [link] [comments]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

RX5700 GPU mining rig vs ASIC miner A10 for Ethereum mining !?

RX5700 GPU mining rig vs ASIC miner A10 for Ethereum mining !?
https://preview.redd.it/9txedwr1wy251.jpg?width=1920&format=pjpg&auto=webp&s=e91116819600b605ffca6ce830fdd582d3965466
I want to clear out the air about Ethereum mining. The GPU mining vs Asic mining, is Ethereum now Asic mining Algorithm. Can RX5700 most efficient Graphic cards for ETH mining Compete with Asic miner A10.
For the last day i have been working on some stats and ROI for 2 types of investment for 12xGPU RX5700 MineBox 12 mining rig and Innosilicon A10 ETH ASIC miner. My goal was to let the data speak about it self and then make a decision what is better investment for ethereum mining GPU or ASIC. Im compering 2 most efficient miners :
  1. ASIC miner Innosilicon A10 , costs 3000usd(specs. 500mh/s at 860w)
  2. GPU miner MineBox12 , cost 4487euro ( specs 700mh/s at 1800w)
Miner price is about the average would it cost to you 12xGPU mining rig might cost you 100-300 cheaper if you would build one yourself. Innosilicon A10 would cost you lot more if you would like to import it out of China. Price would be closer to 3500euro + you would need to buy power-supply for it.
I have created google spreadsheet and inserted the GPU data and performance by the current currencies price and mining profitability. Included also my thoughts about advantages and disadvantages using GPU or Asic miner:

https://preview.redd.it/mojtvv7yvy251.jpg?width=1234&format=pjpg&auto=webp&s=f3384599287ea15a4b6f92ffb973a4019330bdca
Opinion based on mining profit data. We can see that MineBox 12 ROI if electric price is free or very cheap is faster then ASIC miner A10. And even at 0.10c a kw/h at current Ethereum price there is only 80day difference on Equipment payback time. But the biggest thing is for example when your miners are paid back your investment. You still are available to resell your MineBox 12 hardware for other use case or just mine different coins. Where with Innosilicon A10 you can throw it into bin as soon as ETHASH coins are not profitable to mine. This is the biggest downside of Asic miners. So to answer your question is ETH asic mining coin. My answer would be Yes ASIC miners are slightly more profitable , BUT they are not worth the risk you are getting by buying one. Also you can see clearly that GPU miners has lot more advantages then Asic miners. The difference on ETH miners are not so noticeable then like it was Bitcoin GPU vs ASIC mining. There is still profit to be made with GPUs mining ETH. If ETH switches to new POW ProgPOW , again another benefit for GPU rigs as the same GPUs are quite efficient mining ProgPow. Buying and Asic miner there is to much risk, saying from experience. Have lost a lot of money, my last adventure bought 5xAntminer S17 back in November and 4 of them hashing boards stopped working after 1st week. Not counting the previous purchases Antminer D3 etc..
Let me guys know what you think about this, would your rather use ASIC miner for mining ETH of GPU miner?
video : https://www.youtube.com/watch?v=YgVl7pDkkwg&feature=youtu.be
submitted by mineshop to gpumining [link] [comments]

Can anyone give me a quick explanation?

Hi everybody! Beginner bitcoin miner here. I recently bought a newpac bitcoin USB stick miner just to mess around with and explore the world of bitcoin mining. I finally got it running today just off of my motherboard and it is averaging somewhere around 25 Gh/s. I'm using cudo miner btw. I have also been running my gpu, a Radeon RX 570 to mine which has been averaging around 10-12 Mh/s. When i check my stats on CudoMiner my newpac is making wayyyyy less satoshis than my GPU. Can anyone help me explain why this is happening when the newpac is averaging a lot more hash power?
Thanks in advance.
submitted by JustAnotherChonch to BitcoinMining [link] [comments]

How to increase the hash rate on 1660ti.

#startmining

How to increase the hash rate on 1660ti.

MSI 1660ti is the best GPU out there in the market which is pocket friendly and also best for mining crypto currency. It has has out of box hashrate of about 22.7 Mhs but i have end up getting above 30.5 Mhs by overclocking it with MSI afterburner making both the mining rig and my system run smoothly.
I mine Ethereum with 2 MSI 1660ti graphic cards and i get over 61.8 Mhs which is apsolutely brilliant.
Overclocking settings i have used are as follows:
Core Voltage: 0%
Power limit: 70%
Temp limit: 72%
Core clock: -170
Memory clock: +1050
Fan speed: 60
My GPU 1 current temp : 49 degree celsius
My GPU 2 Current temp : 47 degree celsius
You can also download a free crypto browser and start earning free bitcoin today here: https://cryptotabbrowser.com/14685350
submitted by Sensitive-Court2050 to u/Sensitive-Court2050 [link] [comments]

Why i’m bullish on Zilliqa (long read)

Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analysed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralised and scalable in my opinion.
 
Below I post my analysis why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since end of January 2019 with daily transaction rate growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralised and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. Maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realised early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralised, secure and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in amount of nodes. More nodes = higher transaction throughput and increased decentralisation. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue disecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as:
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
 
Next he states that: >“blockchains are fundamentally systems for managing valid state transitions”.* For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralised and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimisation on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (>66%) double spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT etc. Another thing we haven’t looked at yet is the amount of decentralisation.
 
Decentralisation
 
Currently there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralised nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching their transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public.They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers.The 5% block rewards with an annual yield of 10.03% translates to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS & shard nodes and seed nodes becoming more decentralised too, Zilliqa qualifies for the label of decentralised in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. Faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time stamped so you’ll start right away with a platform introduction, R&D roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalised: programming languages can be divided into being ‘object oriented’ or ‘functional’. Here is an ELI5 given by software development academy: > “all programmes have two basic components, data – what the programme knows – and behaviour – what the programme can do with that data. So object-oriented programming states that combining data and related behaviours in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behaviour are different things and should be separated to ensure their clarity.”
 
Scilla is on the functional side and shares similarities with OCaml: > OCaml is a general purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognised by academics and won a so called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities safety is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa for Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue:
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships  
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organisations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggest that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already taking advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, AirBnB, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They dont just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities) also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiatives (correct me if I’m wrong though). This suggest in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures & Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

Mining and Dogecoin - Some FAQs

Hey shibes,
I see a lot of posts about mining lately and questions about the core wallet and how to mine with it, so here are some facts!
Feel free to add information to that thread or correct me if I did any mistake.

You downloaded the core wallet

Great! After a decade it probably synced and now you are wondering how to get coins? Bad news: You don't get coins by running your wallet, even running it as a full node. Check what a full node is here.
Maybe you thought so, because you saw a very old screenshot of a wallet, like this (Version 1.2). This version had a "Dig" tab where you can enter your mining configuration. The current version doesn't have this anymore, probably because it doesn't make sense anymore.

You downloaded a GPU/CPU miner

Nice! You did it, even your antivirus system probably went postal and you started covering all your webcams... But here is the bad news again: Since people are using ASIC miners, you just can't compete with your CPU hardware anymore. Even with your more advanced GPU you will have a hard time. The hashrate is too high for a desktop PC to compete with them. The blocks should be mined every 1 minute (or so) and that's causing the difficulty to go up - and we are out... So definitly check what is your hashrate while you are mining, you would need about 1.5 MH/s to make 1 Doge in 24 hours!

Mining Doge

Let us start with a quote:
"Dogecoin Core 1.8 introduces AuxPoW from block 371,337. AuxPoW is a technology which enables miners to submit work done while mining other coins, as work on the Dogecoin block chain."
- langerhans
What does this mean? You could waste your hashrate only on the Dogecoin chain, probably find never a block, but when, you only receive about 10.000 Dogecoins, currently worth about $25. Or you could apply your hashrate to LTC and Doge (and probably even more) at the same time. Your change of solving the block (finding the nonce) is your hashrate divided by the hashrat in sum - and this is about the same for Doge and LTC. This means you will always want to submit your work to all chains available!

Mining solo versus pool

So let's face it - mining solo won't get you anywhere, so let's mine on a pool! If you have a really bad Hashrate, please consider that: Often you need about $1 or $2 worth of crypto to receive a payout (without fees). This means, you have to get there. With 100 MH/s on prohashing, it takes about 6 days, running 24/7 to get to that threshold. Now you can do the math... 1 MH/s = 1000 KH/s, if you are below 1 MH/s, you probably won't have fun.

Buying an ASIC

You found an old BTC USB-miner with 24 GH/s (1 GH/s = 1000 MH/s) for $80 bucks - next stop lambo!? Sorry, bad news again, this hashrate is for SHA-256! If you want to mine LTC/Doge you will need a miner using scrypt with quite lower numbers on the hashrate per second, so don't fall for that. Often when you have a big miner (= also loud), you get more Hashrate per $ spent on the miner, but most will still run on a operational loss, because the electricity is too expensive and the miners will be outdated soon again. Leading me to my next point...

Making profit

You won't make money running your miner. Just do the math: What if you would have bougth a miner 1 year ago? Substract costs for electricity and then compare to: What if you just have bought coins. In most cases you would have a greater profit by just buying coins, maybe even with a "stable" coin like Doges.

Cloud Mining

Okay, this was a lot of text and you are still on the hook? Maybe you are desperated enough to invest in some cloud mining contract... But this isn't a good idea either, because most of such contracts are scams based on a ponzi scheme. You often can spot them easy, because they guarantee way to high profits, or they fake payouts that never happened, etc.
Just a thought: If someone in a subway says to you: Give me $1 and lets meet in one year, right here and I give you $54,211,841, you wouldn't trust him and if some mining contract says they will give you 5% a day it is basically the same.
Also rember the merged mining part. Nobody would offer you to mine Doges, they would offer you to buy a hashrate for scrypt that will apply on multiple chains.

Alternative coins

Maybe try to mine a coin where you don't have ASICs yet, like Monero and exchange them to Doge. If somebody already tried this - feel free to add your thoughts!

Folding at Home (Doge)

Some people say folding at home (FAH - https://www.dogecoinfah.com/) still the best. I just installed the tool and it says I would make 69.852 points a day, running on medium power what equates to 8 Doges. It is easy, it was fun, but it isn't much.
Thanks for reading
_nformant
submitted by _nformant to dogecoin [link] [comments]

Mining profitability gaining momentum

Mining profitability gaining momentum
We are back!
For the last 2 years there was not much to shill in mining mining was on the life support. And the profits constantly got decreasing. Start of 2020 Bitcoin and Altcoins are showing great performance in price action. This price action has also increased mining profits in some coins for more then 100% since december 2019. It might be to early to say that “we are back” , as crypto can be so unpredictable. But there is a lot of signs that we have now oversold a lot and value of crypto market is increasing steadily. We might see this pattern continue for good bit of times as BTC halving is coming up in 3 month. Let’s get in straight in. I will choose 3 hardware devices which in my opinion would be the best choice and we will see how profitable they are.
If you are new to mining and you want to know which devices to choose, choose from top market cap coins latest equipment. This will be your safest bet, as the mining profits are much more stable on bigger cap coins then on smaller cap coins. If you are small miner and don’t have large electric bills, you can choose smaller cap coins. They might go up in price lot faster then bigger cap coins in bull market, but be aware they they might dump lot faster. It is high risk high reward type of mining.
If you are really serious about mining, you need to look at cheapest power source possible which would be in 0.05c a kw/h range. It is not 2017 and mining from home wont be profitable at 0.30c a kw/h. Industrial power is possible to achieve 0.05 in many places in the world. If it is not possible in your country , look for the country where it is possible. So all profit calculations done for 0.05c a kw/h
Top mining profitability websites :
  • https://www.asicminervalue.com/ It is great website to see newest ASIC miners and their profitability. Usually the new upcoming mining machines gets listed here. So come and checkout this page every few days/weeks this page if you are serious about mining.

https://preview.redd.it/aut9qgz76df41.png?width=1206&format=png&auto=webp&s=b85486b8b0171c91301c6fa9827bc3795a4ea2b7
  • https://whattomine.com/ Is the best known for GPU/CPU mining profitability. You can choose what ever hardware to use and it will give you the best and most profitable coins to mine. It is very simple to use it. It does have Also asic miner profitability check, but for asics i do prefer asicminervalue,com

https://preview.redd.it/y0xr3dr86df41.png?width=1182&format=png&auto=webp&s=439e7cb67f8becc86f4d97c128504636922939e9
The top and 3 most profitable Crypto currencies to mine in February 2020 , for some people miner pick could be different. The prices changes if you are buying new/used , depending in which part of the world are you. This is my recommended , brand new purchase in Europe.
  • Bitcoin – Most suitable Antminer S17+ . It is one of the efficient Bitcoin miner currently publicly available, alternatives would be M20s miner and Avalon miner 1166. Antminer S17 efficiency is 73TH/s @ 3000watts . Current profitability after you have paid your electric bill is 7.82 usd in 24hours , with ROI achievable in 6-7month. It does seems great, but crypto doesn’t stand still. And has plenty of risks.

https://preview.redd.it/msokirj96df41.png?width=891&format=png&auto=webp&s=7552b4aff2c0df4c25d9a72ecc25dfb4c2510f43
  • Ethereum – Best miner to use is RX5700 graphic cards mining rig. I know there is an ASIC miner available A10, but most of you who are in mining will agree with me, that it is complete junk. It is only slightly more efficient then RX5700 gpu rig in terms of price per hash and watt per hash . But it is 10x more riskier investment in mining rig then buying GPU mining rig. So the efficiency of 12xgpu RX5700 mining rig is 640 mh/s @ 1700watts. Current profitability after you have paid your electric bill is 7.62 usd in 24hours , with ROI achievable in about 20-22 month. Ethereum is one of the underdogs which could perform quite well in 2020 and might reduce your ROI much more faster.

https://preview.redd.it/ajx9eyfc6df41.png?width=894&format=png&auto=webp&s=30442d846a9d70ea3eaac6eaf7c2bdbe476384e4
  • DASH – Lately has been released most efficient DASH miner STU-U6. Asic miners are very risky investment, but sometimes they might be very profitable. The beauty of this miner is that it is quite new model and it is mining profitably DASH , even that DASH is still over 90%down from its all time highs. This miner performance is 420GH/s u/2100 watts. Current profitability after you have paid your electric bill is 8.11 usd in 24hours , with ROI achievable in about 5-6 month.

https://preview.redd.it/l80xnwbd6df41.png?width=902&format=png&auto=webp&s=5620ecf7af742cdcae0ae7010cf910d9131ae801
These would be my to pick miners for start of 2020. There is big risks in any on these miners as no high reward investment is guaranteed anywhere. I’ll have more detailed explanation of the risks of each of these miners in my next post.
Any miner suggestion, what would be your best choice and why?

Video here - https://www.youtube.com/watch?v=QvVYQFJEmnQ&t
submitted by mineshop to gpumining [link] [comments]

AMD RX 5600 XT Mining Performance

AMD RX 5600 XT Mining Performance
**Disclaimer**
[Still testing, and Tuning but the new AMD RDNA Architecture is new and not only is AMD still optimizing drivers, the mining Developers who DO NOT get GPU's sent to them, are still working on optimizations. Please be patient with me as I continue to test and allow sufficient time for new miners to be developed.]

Same as before, I am sharing my performance numbers with the Crypto Mining community, so we can collaborate together. The RX 5000 series GPUs, unfortunately, don't have the ability to mine every Algorithm available. Mining Devs are still working on it still, but you find what I tested so far below. I did test the SoftPowerPlayTables, MorePowerTool and force flashing a different Vbios on the GPU but to no avail. The card either won't boot or if it does it looks the core clock to 300 Mhz. These GPU's were meant to compete against the GTX 1660 TI and 1660 Super, but due to price war with Nvidia, AMD released a VBIOS to allow the RX 5600 XT compete with the RTX 2060 (KO).
I will test any updates, and when I get time, I will update my findings below. I did a live stream recently, which you can find below, but it was lengthy. I speak on the recent AMD launch of this GPU, what I tried, the mining performance, power draw, and whether you should consider this GPU for cryptocurrency mining. So if you got time, please feel free to check it out, otherwise, when I get time from my busy life, I will try to get a summary video together for you guys. Carter from BitsBeTrippin should be doing his own independent testing in the future, and I always recommend checking more than one review for your research. Take care!

Sapphire Pulse RX 5600 XT | AMD Adrenalin 2020 Edition 20.1.3

Miner Hashrate Clocks and Power Voltage Power Draw Software / Wall
Ethereum(ETH) - Ethash
Claymore v15 (Stock) 37.7 Mhs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 122 Watts - 125 @ Wall
Claymore v15 (Tuning) 40.1 Mhs Core 1780 Mhz / Mem 1860 Mhz 0.960 Vcore 123 Watts - 126 @ Wall
Claymore v15 (Tuning) 40.4 Mhs Core 1500 Mhz / Mem 1860 Mhz 0.800 Vcore 92 Watts / 94 @ Wall
Phoenix Miner 4.9c 40.5 Mhs Core 1780 Mhz / Mem 1860 Mhz 0.960 Vcore 122 Watts - 126 @ Wall
Phoenix Miner 4.9c Best Config 40.6 Mhs Core 1500 Mhz / Mem 1860 Mhz 0.800 Vcore 85 Watts - 88 @ Wall
Phoenix Miner 4.9c 55.7 Mhs [invalid shares mostly] ( -openclLocalWork 128 -openclGlobalMultiplier 4096 ) Core 1780 Mhz / Mem 1860 Mhz 0.960 Vcore 122 Watts - 130 @ Wall
Grin-CR29(GRIN) - Cuckaroom29
LoLminer v 0.9.6.1 4.06 g/s Core 1600 Mhz / Mem 1840 Mhz 0.800 Vcore 89 Watts / 92 @ Wall
LoLminer v 0.9.6.1 4.03 g/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 115 Watts / 118 @ Wall
LoLminer v 0.9.6.1 4.33 G/s Core 1820 Mhz / Mem 1850 Mhz 0.960 Vcore 125 Watts / 127 @ Wall
LoLminer v 0.9.6.1 4.37 g/s Core 1820 Mhz / Mem 1860 Mhz 0.960 Vcore 125 Watts / 128 @ Wall
Beam(BEAM)BeamHashII
LoLminer v 0.9.6.1 31.03 sol/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 128 Watts / 130 @ Wall
LoLminer v 0.9.6.1 32.8 sol/s Core 1820 Mhz / Mem 1860 Mhz 0.960 Vcore 134 Watts / 138 @ Wall
LoLminer v 0.9.6.1 28.98 sol/s Core 1650 Mhz / Mem 1840 Mhz 0.800 Vcore 88 Watts / 91 @ Wall
Ryo(RYO) - CryptoNightGPU
XMR-Stak 2.10.8 Unroll - 8 1567.5 h/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 138 Watts / 141 @ Wall
XMR-Stak 2.10.8 Unroll - 8 1645.3 h/s Core 1820 Mhz / Mem 1860 Mhz 0.960 Vcore 138 Watts / 141 @ Wall
XMR-Stak 2.10.8 Unroll - 8 1620 h/s Core 1820 Mhz / Mem 1860 Mhz 0.900 Vcore 130 Watts / 134 @ Wall
XMR-Stak 2.10.8 Unroll - 1 1654.3 h/s Core 1820 Mhz / Mem 1860 Mhz 0.960 Vcore 138 Watts / 142 @ Wall
Conceal(CCX) - CryptoNightConceal
XMR-Stak 2.10.8 1822.2 h/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 97 Watts / 100 @ Wall
XMR-Stak 2.10.8 1930 h/s Core 1820 Mhz / Mem 1860 Mhz 0.960 Vcore 97 Watts / 100 @ Wall
XMR-Stak 2.10.8 1930 h/s Core 1820 Mhz / Mem 1860 Mhz 0.900 Vcore 94 Watts / 98 @ Wall
HavenProtocol(XHV)CryptoNightHaven
XMR-Stak 2.10.8 948 h/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 88 Watts / 92 @ Wall
XMR-Stak 2.10.8 1063 h/s Core 1820 Mhz / Mem 1860 Mhz 0.875 Vcore 85 Watts / 88 @ Wall
XMR-Stak 2.10.8 1172 h/s Core 1650 Mhz / Mem 1860 Mhz 0.800 Vcore 81 Watts / 85 @ Wall
BitTube(TUBE)CryptoNightSaber
XMR-Stak 2.10.8 1063 h/s Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 100 Watts / 102 @ Wall
XMR-Stak 2.10.8 1078 h/s Core 1820 Mhz / Mem 1860 Mhz 0.875 Vcore 82 Watts / 85 @ Wall
XMR-Stak 2.10.8 1086 h/s Core 1650 Mhz / Mem 1860 Mhz 0.800 Vcore 78 Watts / 82 @ Wall
Bitcoin Interest(BCI) ProgPow
Phoenix Miner 4.9c 0.972 Mhs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 115 Watts / 118 @ Wall
Phoenix Miner 4.9c 0.870 Mhs Core 1300 Mhz / Mem 1840 Mhz 0.800 Vcore 81 Watts / 85 @ Wall
Phoenix Miner 4.9c 0.972 Mhs Core 1820 Mhz / Mem 1850 Mhz 0.875 Vcore 108 Watts / 112 @ Wall
Zcoin(XZC)MTP
Wildrig Miner 0.20.1 2410 Khs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 155 Watts / 160 @ Wall
Wildrig Miner 0.20.1 2462 Khs Core 1820 Mhz / Mem 1850 Mhz 0.960 Vcore 155 Watts / 160 @ Wall
Wildrig Miner 0.20.1 2342 Khs Core 1650 Mhz / Mem 1840 Mhz 0.800 Vcore 118 Watts / 121 @ Wall
Wildrig Miner 0.20.1 Other Algos Stock Settings
Lyra2REv3 62.7 Mhs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 155 Watts / 160 @ Wall
Blake2b - Wildrig 1.84 Ghs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 134 Watts / 138 @ Wall
BMW512 0.988 Ghs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 134 Watts / 138 @ Wall
Blake2s 3.98 Ghs Core 1780 Mhz / Mem 1750 Mhz 0.960 Vcore 131 Watts / 136 @ Wall

Live Stream, Testing Mining Performance of the Sapphire Pulse RX 5600 XT
https://youtu.be/ffe1rdwuX1w
Summary of Live Stream, in shorter Video:
https://youtu.be/dixRu8wY_lo
https://preview.redd.it/vz2bvrbca1d41.jpg?width=480&format=pjpg&auto=webp&s=68241a3eedd6f19f932b23e74401fa4eb3f257f7
submitted by cmvjax to gpumining [link] [comments]

[USA-NJ][H] i7 5960X COMBO Workstation [W] Local Cash

Selling my grad school workstation. Kept clean, lots of CAD work and some DOTA, light overclock, no rendering or bitcoin mining.
CPU: i7 5960X
Cooling: Noctua NH-D15S
RAM: 32 GB 2400 MhZ DDR4
Storage: Samsung 250 GB 950 Pro, and 250 GB 970 EVO M2
GPU: GTX 1060 6GB
with
Wireless Card
NZXT H500 Case + power supply, Noctua exhaust fans
Timestamps.
$450 for the lot, local cash.
EDIT: Pending pickup from u/RadiantWinds
EDIT: Sold to u/RadiantWinds
submitted by Vermillionbird to hardwareswap [link] [comments]

Are ASICs a real problem for Ethereum miners?

Are ASICs a real problem for Ethereum miners?
ASICs are coming to the Ethereum mining industry, and small independent miners are virtually doomed. 2Ether has come up with a solution — the third element in our dynamic block reward system. But before we explain it, we’ll have to talk about Ethereum ASICs.
If you don’t know that much about Ethereum, you might be surprised to learn that ASICs for mining ETH actually exist. Isn’t Ethereum’s algorithm — Ethash — supposed to be ASIC-resistant? If it isn’t then why is everyone still mining using GPUs?
Well, Ethash is indeed much less ASIC-friendly than the algorithm of Bitcoin. It doesn’t mean that you can’t make ASIC chips for mining ether, though. It’s just that it’s difficult to make ASICs that would be much more efficient than graphic cards (GPUs).
The efficiency of a piece of mining hardware is calculated as a ratio of power (measured in kilowatt hours) to hash power (measured in megahash per second). So for example, if you have two devices that both produce 50 MH/s, but one of them consumes 1 kWh, and the other consumes 2 kWh, then the first device is twice more efficient.
ASICs cost a lot of money to design, and their market price is high. So it only makes sense to buy an ASIC if it gives you a serious advantage over other types of hardware. You should also keep in mind that if the algorithm changes, you’ll need to replace your ASIC with a new model. Such chips are built to carry out one task and one task only — that’s why they are called application-specific integrated circuits (that’s how the acronym is deciphered).
Now, the first ASICs for Ethereum came out in April 2018, and they were more than a curious gadget than a serious rival to GPUs. Vitalik Buterin said that they were not a threat and the best action would be no action.
But the situation changed. Soon, there were ASICs twice as efficient as the best graphic cards. Still, it wasn’t enough to justify the price difference.
Finally, in late September 2019, Chinese manufacturer and distributor of mining hardware Canaan announced that it would start selling a new ASIC that is 5 to 7 times more efficient than the leading GPU models. Its W/MHs ratio is just 0.68–7.5 times better compared to AMD Vega 64 and 5.3 times better than AMD RX570.
What does this mean for Ethereum mining? When such models go on sale, whoever can afford them will be able to extract very high profits. GPU miners will be at a disadvantage. And if you have only a small rig with a couple of GPUs at home, your prospects are grim.
You might ask: can’t Ethereum devs do something — say, change the algorithm? Bitcoin algo changes regularly, after all. Unfortunately, Ethereum works differently, so every algorithm change would require a hard fork — with all the consequences it entails. The devs have been talking about introducing a new consensus protocol called ProgPOW (Programmable Proof of Work). It would make the algorithm change regularly and ensure ASIC resistance. But Vitalik Buterin believes that the real goal is a switch to Proof of Stake, not tweaking PoW.
What other options are there to protect small miners from the upcoming wave of ASICs? In our next post, we’ll explain how 2Ether plans to deal with this problem.

https://2ether.com/
Web site — https://2ether.com/ Twitter — https://twitter.com/2Ether_ Discord — https://discord.gg/TuqG4py Facebook — https://www.facebook.com/2Ethe Reddit — https://www.reddit.com/use2Ether Medium — https://medium.com/@2ether Teletype — https://teletype.in/@2ether Telegram — https://t.me/ether2support Telegram chat — https://t.me/blockchain_2ether
submitted by 2Ether to u/2Ether [link] [comments]

Canaan's new ASIC is a Pipe Dream, not an Ethereum Threat

So, yesterday Kristy-Leigh Minehan posted on Twitter that a company named Canaan announced an ASIC that is capable of 0.68W/Mhs
That's 2200Mh/s running at 1500w
https://twitter.com/OhGodAGirl/status/1176938519866089473
Here is a list of how it compares to other ASICs and GPUs.
https://blog.miningstore.com/blog/ethereum-mining-hardware-for-2019
She used this tweet to promote the need for ProgPoW
Today, I am attempting to explain that Canaan is not a threat to centralize Ethereum mining with their ASICs.
First, I cannot find any information regarding Canaan announcing an Ethereum ASIC other than Kristy's twitter post
There is only one article written about it and it uses Kristy's twitter post as their source.
https://cryptoslate.com/ethereum-asic-dominates-gpu-performance/
Nothing on Canaan's website talks about this miner
Nor does Canaan's twitter account mention anything like this.
If we look closely at Kristy's twitter picture, you can see the Canaan Ethereum miner will be called the V10.
I cannot find any info anywhere on this miner.
You would think that if Canaan is unveiling a new product, they would be talking about it more to spread awareness and raise hype, but they aren't.
I mean, they made a big to-do when they announced the A10 bitcoin miner in March, so why are they posting nothing about the V10 ethereum miner.
https://twitter.com/canaanio/status/1111513725733724160
And a google search will show many many more articles written about the bitcoin A10 after its announcement.
I'm not saying the announcement isn't real, just that I find it odd that the company isn't talking about it themselves.
Canaan did respond to a tweet from “cryptoState”, the writer's of the article based on Kristy's tweet.
Canaan replied that the v10 is not an official worldwide Canaan product.
https://twitter.com/canaanio/status/1177088253431668736
and further in the cryptostate article, Canaan says “It is a little hard to explain, but those are not products designed and built by Canaan engineering. They are products sold by the domestic sales team and are not an official worldwide Canaan product,”
I do not know what that means exactly. If it means it's not an official Canaan product, or that it won't be available worldwide, or what.
But this is the first clue to me that it isn't anything to worry about.
If it's not an official Canaan product, then it doesn't seem like it will have support from Canaan to bring it to market.
It won't be marketed by Canaan, use it's supply chain, it's business resources and contacts, use it's support system, or be built by Canaan.
Next, yes 0.68W/Mhs is more efficient than GPUs, but that isn't all that matters when miners choose the devices to use.
What matters also is how much the machine costs.
If the V10 is price too high, then it's not something to worry about.
Without a price, Kristy can't claim in good faith that the V10 is something Ethereum needs to worry about and a reason ProgPoW needs to be adopted.
I'm not sure how to price the thing, myself, but at current ETH prices and hashrate, it would make $2200 in 4 months.
I think generally ASIC mfgs price their machines to break even in 3-4 months.
So that would be the machine will cost around $2200.
BUT, that's only if ONE machine is running on the network.
The more machines on the network, the less profitable they are.
If we look at the Avalon A1066, it's november batch costs $1390, and has a break-even time of 464 months at current bitcoin prices.
So it seems to me the Canaan V10 will be quite a bit more expensive than $2200.
Which doesn't make it feasible for that many people to buy.
Next, there was no product on display at the New Era Mining Summit, where this product was announced.
Only some graphics of numbers they claim.
Nor can I find any technical documentation talking about how they plan to achieve the advertised hashrate
I tweeted Kristy telling her that this seems, at best, like just an idea to me, to help them raise money and that it takes more than an idea to bring an ASIC to market.
https://twitter.com/AltcoinXP/status/1177290387205054464
Kristy then blocked me on Twitter and told me to stop spreading misinformation.
https://imgur.com/lWEAWbd
So, now let's talk about the article I replied to her with, claiming that Canaan doesn't have enough funding for this.
Granted, I said this without doing as much research as I could've, but let's see if what I said holds true.
Here is the article I linked in the tweet.
https://www.coindesk.com/avalon-bitcoin-miner-maker-canaan-is-plotting-another-ipo-attempt
Notice the date this article was published. March 27th 2019.
Notice that Avalon announce their Bitcoin A10 miner the next day.
https://twitter.com/canaanio/status/1111513725733724160
Perhaps to help attract funding from new investors, which the Coindesk article says they haven't been able to bring on any new investors in a long time.
I'm not going to cite the whole article here, read it for yourself, but it generally explains that Canaan is unable to attract new funding.
Also, Xianfu Lui, a 17.2% shareholder in Canaan left the company in February, so I doubt he invested money into Canaan.
https://www.coindesk.com/co-founder-quits-avalon-mining-chip-maker-canaan-over-differences
Here are some more Coindesk articles speaking about Canaan trying to raise money.
https://www.coindesk.com/huobi-plans-backdoor-ipo-attempt-in-hong-kong-document-suggests
“After mining giant Bitmain’s IPO attempt in Hong Kong was allowed to expire, apparently due to reluctance from HKEX, it’s reportedly now planning to list in the U.S. Another miner manufacturer, Canaan Creative, is also reported to have already confidentially filed in the U.S. after a failed HKEX attempt. “
https://www.coindesk.com/bitcoin-miner-maker-canaan-confidentially-files-for-ipo-in-us-report
https://www.coindesk.com/bitcoin-miner-canaans-ipo-likely-delayed-after-hong-kong-filing-expires
“The Reuters report, citing anonymous sources, further said the HKEX and financial regulators in Hong Kong have raised questions over Canaan’s business model, given the volatile nature of cryptocurrencies. As such, the news agency said the IPO might not go ahead this year, since there have been no updates from a listing hearing with the HKEX. “
So seems to be Caanan is having a hard time finding funding for their endeavors. Pretty much every single article on Coindesk about them is about them trying to get funding and failing at it.
So do they have enough money to bring the V10 to market AND bring enough V10s to be a problem?
They would need to produce 45,000 units to get 50% of the Ethereum mining power.
Current network is 197TH/s https://bitinfocharts.com/ethereum/
Currently Bitmain is estimated to have produced less than 20,000 units since the Antminer E3's announcement in April 2018.
https://www.reddit.com/ethereum/comments/d8fuvj/an_argument_against_progpow_a_day_part_1/f1axc2c/
https://www.coindesk.com/bitmain-confirms-release-first-ever-ethereum-asic-miners
Bitmain being a much larger company than Canaan, it seems unlikely they will produce 45,000 units quick enough to become a problem.
Anyway,
For those of you that don't know, Canaan manages the Avalon bitcoin ASICs and have done so since 2014. Canaan is fulling in charge of Avalon.
https://en.bitcoin.it/wiki/Avalon
Maybe I should've said that sooner, I don't know. I'm just typing as I come up with stuff.
But we can look at Avalon's bitcoin past to determine what the future ethereum miner supply might look like. Keep in mind though, this was also during a time when they were well-funded.
I'm not sure what their bank account looks like now, but they have been in the red every year since their existance, so I have to assume they have less money now than when they were releasing bitcoin miners
Avalon announce the A10 March 2019, and started shipping pre-orders in October 2019.
If the V10 follows suit, we won't see a V10 in the hands of miners until April 2020
https://www.coindesk.com/demand-for-new-bitcoin-miners-is-again-outstripping-supply
Ok, I'm done. That's all I put together and why I don't believe the Canaan ASIC that was announced is a concern warranting the immediate adoption of ProgPoW
Thanks for reading.
submitted by Anthony-AltcoinXP to ethereum [link] [comments]

RX 5700 (NON XT) Mining Performance (7/28/2019)

**Disclaimer**
[Still testing, and Tuning but the new AMD RDNA Architecture is new and not only is AMD still optimizing drivers, the mining Developers who DO NOT get GPU's sent to them, are still working on optimizations. Please be patient with me as I continue to test and allow sufficient time for new miners to be developed.]
Same stuff different day just as with the RX 590 Fatboy and RTX 2080, I will be testing the RX 5700 over time as new miners come out, to compare price to performance for mining. Below are some of my results when testing the new AMD RX 5700 (Non XT) graphics card mining performance, now I was only able to get a few working. I did some videos on its Gaming performance and the "SoftPowerPlayTables" mod from Igor's Lab at Tom's Hardware, which allowed the RX 5700 to really stretch its legs. Allowing this Non-XT model to surpass the RTX 2060 Super and even get on par with the first Gen RTX 2070. Moving forward, as new miners are release I will update my numbers and test when I can.
***UPDATE: 7/31/19 - New Phoenix Miner 4.5c still only getting 2 - 4 Mhs, XMR Stak 2.10.7, only Algo that will run is RYO
***UPDATE: 9/15/19 - Updated Power Draw numbers, as my Watt Meter died, new one in and retested Algos below
***UPDATE: 12/14/19 - Updated and added Algos as miner support was implemented. Retesting with Radeon Adrenalin 2020 driver
***UPDATE: 1/22/19 - Updated additional miners as support was implemented. Retesting with Radeon Adrenalin 2020 driver (20.1.3)
RX 5700 GPU
Driver Currently in Use:
Mining Performance AMD DRIVER - Adrenalin Edition 19.9.1
OverdriveNTool 0.2.8
Average temps during mining
Stock Setup: 65c - 72c
Aggressive Fan Curve: 40% - 75%
Algo (Mining Program) / OC settings (volt mV) / Power draw

Claymore Miner (Updates will Follow) [ UPDATED 9/15/2019 got new Kill-A-Watt Meter ]
ETH (Claymore Miner V 15) STOCK*** 49.5 MHs 1750 Core (1037 mV) / Mem 1750 (850mV) 155 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 51 MHs 1900 Core (1037mV) / Mem 1800 (850mV) 155 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 53.2 MHs 1750 Core (990mV) / Mem 1850(850mV) 160 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 53.5 MHs 1750 Core (990mV) / Mem 1860 (850mV) 160 Watts
ETH (Claymore Miner V 15) SPPT Mod*** [Best Config] 52.6 MHs 1325Core (900mV) / Mem 1860 (850mV) 115 Watts

Claymore Miner (Updates will Follow) [ UPDATED 9/15/2019 got new Kill-A-Watt Meter ]

ETH (Phoenix Miner) STOCK*** 48.8 MHs 1750 Core (1037 mV) / Mem 1750 (850mV) 155 Watts
ETH (Phoenix Miner) [Best Config] 53.4 Mhs 1250 Core (750 mV) / Mem 1850 (850 mV) 115 Watts

ProgPow | BCI - Bitcoin Interest (ethminer not working on Navi ATM)
Phoenix Miner 4.9c Stock 1.44 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 140 Watts
Phoenix Miner 4.9c 1.291 1500 Core (805mV) / Mem 1850 (850mV) 96 Watts
WildRig Multi Miner
Blake2b (WildRig Multi (0.20.1) 1.86 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 132 Watts
Blake2s (WildRig Multi (0.20.1) 4.7 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 128 Watts
BMW512 (WildRig Multi (0.20.1) 1.05 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 130 Watts
Lrya2Rev3 (WildRig Multi (0.20.1) 61.4 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
Lrya2Rev2 (WildRig Multi (0.19 Beta) 1.04 Khs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
Lrya2vCoban (WildRig Multi (0.19 Beta) 54.5 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
MTP (WildRig Multi (0.20.1) 2.5 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 152 Watts

XMR-Stak (Updates will Follow)
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.42 Khs (1 Thread) 1750 Core (1018 mV) / Mem 1750 (850mV) 132 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.62 Khs (2 Threads) 1750 Core (1018 mV) / Mem 1750 (850mV) 155 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.89 Khs (2 Threads) 1900 Core (1018 mV) / Mem 1750 (850mV) 160 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.89 Khs (2 Threads) Undervolt 1900 Core (1000 mV) / Mem 1750 (850mV) 155 Watts
Cryptonight-Conceal - CCX (XMRStak 2.10.8) 2.23 Khs (1 Thread) 1750 Core (1018 mV) / Mem 1750 (850mV) 116 Watts

XMR-Stak - Cryptonight-R
Cryptonight-R (XMRStak 2.10.7) 1.1 Khs (2 Threads) Undervolt 1325Core (800mV) / Mem 940 (850mV) 90 Watts
Cryptonight-R (XMRStak 2.10.7) 1.145 Khs (2 Threads) 1750 Core (1018 mV) / Mem 875 (850mV) 128 Watts

LOL miner - Grin 29
Grin29 (LoLMiner 0.8.8) 5.2 G/s 1750 Core (1037 mV) / Mem 1750 (850mV) 128 Watts
Grin31 (LoLMiner 0.9.3) 0.95 G/s 1750 Core (1037 mV) / Mem 1750 (850mV) 130 Watts

RX 5700 Mining Performance (WildRig - XMRStak)
submitted by cmvjax to gpumining [link] [comments]

Bitcoin Gold a Shitcoin Vulnerable to Attack Despite $200 Million Market Cap

Bitcoin Gold a Shitcoin Vulnerable to Attack Despite $200 Million Market Cap

https://preview.redd.it/vddehe8qfo321.png?width=690&format=png&auto=webp&s=44a4111dddd126729769612bd27e1ebc30753e14
https://cryptoiq.co/bitcoin-gold-a-shitcoin-vulnerable-to-attack-despite-200-million-market-cap/
The War On Shitcoins Episode 1: Bitcoin Gold (BTG). The war on shitcoins is a Crypto.IQ series that targets and shoots down cryptocurrencies that are not worth investing in either due to their being scams, having serious design flaws, being centralized, or in general just being worthless copies of other cryptocurrencies. There are thousands of shitcoins that are ruining the markets, and Crypto.IQ intends to expose all of them. The crypto space needs an exorcism, and we are happy to provide it.
There are more than 2,000 cryptocurrencies listed on CoinMarketCap, and Bitcoin Gold (BTG) is near the top at number 25 with a market cap of $207 million. This would seem to indicate that Bitcoin Gold is a major cryptocurrency, but it is simply a copycat of Bitcoin with one key and debilitating difference that makes it worse than Bitcoin. Bitcoin Gold is designed to block ASIC miners, leaving only GPU miners.
The idea was that GPU miners would rally around Bitcoin Gold since GPU Bitcoin miners were disenfranchised by ASIC miners years ago. Ultimately, this decision to only allow GPUs resulted in such a low mining hash rate that Bitcoin Gold is vulnerable to 51 percent attacks, and a serious 51 percent attack has already happened once. Further, Bitcoin Gold has had centralization problems from the very beginning.
When Bitcoin Gold launched in November 2017 the developers did a massive premine of 8,000 blocks, which yielded them about 100,000 BTG. At today’s price $12 this is $1.2 million, and when BTG’s price peaked near $500, this was $50 million. This premine is unfair to other BTG miners, traders, and investors. Supposedly, the premined BTG were placed in an “endowment,” which means the developers will receive all of that money eventually, just not all at once. There is no way to verify if this is even true, however, and the excessive 97 percent BTG price crash since January 2018 might be partially due to developers dumping their coins.
A far more serious issue than the premine is BTG’s lack of network security. BTG made mining ASIC resistant by using the Equishash Proof of Work (PoW) algorithm. However, ASICs were eventually developed for Equihash since ASICs can be developed for any PoW algorithm. In May 2018 a 51 percent double spend attack occurred on the Bitcoin Gold network, and a hacker stole $18.6 million from cryptocurrency exchanges that listed BTG. This caused the developers to hard fork in order to implement a newer version of Equihash that is supposedly more ASIC resistant. Clearly, the developers did not learn their lesson that there is no ASIC-resistant PoW algorithm. If Bitcoin Gold became valuable enough, someone would produce an ASIC for it.
It is unclear if Equihash ASICs were the reason for the 51 percent attack, since an attacker could literally just rent some hash rate on a cloud mining site and successfully 51 percent attack Bitcoin Gold. Currently it only takes 1.6 MH/s of rented mining power to successfully perform a double spend attack on the Bitcoin Gold network, and this costs about $1,000 per hour if the hash rate is rented from NiceHash.
Effectively, Bitcoin Gold is not cryptographically secure. The original purpose of banning ASIC miners so that GPU miners could thrive ended up being a fatal flaw for Bitcoin Gold. It is ridiculous that major exchanges like Binance and Bitfinex still offer BTG trading. This is a true disservice to the users of these exchanges and is a risk for the exchanges themselves.
Crypto users need to educate themselves thoroughly before buying any cryptocurrency, or they could end up buying a shitcoin like Bitcoin Gold just because it has a high ranking on CoinMarketCap. BTG has already lost 97 percent of its value since January 2018, and there is strong potential for it to become completely worthless once someone decides to rent some hash power and perform a vicious 51 percent attack.
submitted by turtlecane to CryptoCurrency [link] [comments]

I literally have tens of thousands of dollars in top-shelf hardware, looking to repurpose some before selling on eBay to build a NAS system, possibly a dedicated firewall device as well. o_O

Q1) What will you be doing with this PC? Be as specific as possible, and include specific games or programs you will be using.**

A1) This will be a dedicated NAS system for my home network. As such, I'm looking to have it:

- Host ##TB's of 720, 1080 & up resolution Movies and TV Shows I'm about to begin ripping from a MASSIVE DVD & Blueray collection I have.

- My kids are big on Minecraft. I understand it's possible to host your own "worlds" (or whatever they call the maps you can build) on your own "server". I think it would be pretty neat to offer them (& their friends - if can be done 'safely/securely') their own partition on one of my NAS HDD's.

- I also have accounts with a couple diff VPN companies... I understand it's possible (?) to sync said VPN's with a NAS, this might be a more relative topic on the next point/purpose...

- I'd like to be able to remotely link to this NAS for when I travel overseas and want to stream at my temp location from my house/this NAS.
______________________
Q2) What is your maximum budget before rebates/shipping/taxes?**

* A2) Here's where I make matters more complicated than most others would... I've been an advocate for Bitcoin and crypto-currencies in general since 2013. I invested in a small mining outfit back in 2014 (strictly Bitcoin/ASIC's). One of my buddies is the President of a large-scale mining operation (foreign and domestic) and he convinced me to dabble in the GPU mining-space. I made my first hardware purchase in Q4, 2017 and launched a small-scale GPU-Farm in my house since then. I had the rigs mining up until Q3 of 2018 (not cost-efficient to keep on, especially living in SoFlo) and since then, the hardware's been collecting dust (& pissing off my family members since they lost access to 3X rooms in the house - I won't let anyone go near my gear). One of my New Years Resolutions for 2019 was to clear out the house of all my mining equipment so that's all about to go up on eBay. So "budget" is relative to whatever I "MUST" spend if I can't repurpose any of the parts I already have on hand for this build... (Anyone having something I "need" and is looking to barter for one of the items I'll list later on in here, LMK).
______________________
Q3) When do you plan on building/buying the PC? Note: beyond a week or two from today means any build you receive will be out of date when you want to buy.**

A3) IMMEDIATELY! :)
______________________
Q4) What, exactly, do you need included in the budget? (ToweOS/monitokeyboard/mouse/etc\)**

A4) Well I had a half-assed idea approximately 1 year ago that it might be wise to build a bunch of 'gaming rigs' to sell on eBay with my intended repurposed mining hardware so I went on a shopping spree for like 6 months. That said; I've got a plethora of various other components that aren't even unboxed yet. 90% of the items I've purchased for this additional project were items that were marked down via MIR (mail-in-rebates) & what-not...
AFAIK, there are only 3X items I absolutely do not have which I 'MUST' find. Those would be - 1) Motherboard which accepts "ECC RAM". 2) CPU for said MOBO. 3) Said "ECC RAM".\* 
______________________
Q5) Which country (and state/province) will you be purchasing the parts in? If you're in US, do you have access to a Microcenter location?**

A5) I'm located in Southwest Florida. No Microcenter's here. Best Buy is pretty much my only option although I am a member of Newegg, Amazon & Costco if that makes any difference?
______________________
Q6) If reusing any parts (including monitor(s)/keyboard/mouse/etc), what parts will you be reusing? Brands and models are appreciated.**

A6) In an attempt to better clean up this Q&A, I'm going to list the items I have on-hand at the end of this questionnaire in-case passers-by feel like this might be a TLDR.* (Scroll to the bottom & you'll see what I mean).
______________________
Q7) Will you be overclocking? If yes, are you interested in overclocking right away, or down the line? CPU and/or GPU?**

A7) I don't think that's necessary for my intended purpose although - I'm not against it if that helps & FWIW, I'm pretty skilled @ this task already (it's not rocket science).
______________________
Q8) Are there any specific features or items you want/need in the build? (ex: SSD, large amount of storage or a RAID setup, CUDA or OpenCL support, etc)**

A8) As stated in A4; ECC RAM is non-negotiable... RAID seems like a logical application here as well.

- This will predominantly be receiving commands from MacOS computers. I don't think that matters really but figured it couldn't hurt to let you guys know.\*

- I'd also be quite fond of implementing "PFSENSE" (or something of that caliber) applied to this system so I could give my Netgear Nighthawks less stress in that arena, plus my limited understanding of PFSENSE is that it's ability to act as a firewall runs circles around anything that comes with consumer-grade Wi-Fi routers (like my Nighthawks). Just the same, I'm open to building a second rig just for the firewall.\*

- Another desirable feature would be that it draws as little electricity from the wall as possible. (I'm EXTREMELY skilled in this arena. I have "Kill-A-Watts" to test/gauge on, as well as an intimate understanding of the differences between Silver, Gold, Platinum and Titanium rated PSU's. As well as having already measured each of the PSU's I have on-hand and taken note of the 'target TDP draw' ("Peak Power Efficiency Draw") each one offers when primed with X amount of GPU's when I used them for their original purpose.\*

- Last, but not least, sound (as in noise created from the rig). I'd like to prop this device up on my entertainment center in the living room. I've (almost) all of the top-shelf consumer grade products one could dream of regarding fans and other thermal-related artifacts.

- Almost forgot; this will be hosting to devices on the KODI platform (unless you guys have better alternative suggestions?)
______________________
Q9) Do you have any specific case preferences (Size like ITX/microATX/mid-towefull-tower, styles, colors, window or not, LED lighting, etc), or a particular color theme preference for the components?**

A9) Definitely! Desired theme would be WHITE. If that doesn't work for whatever reason, black or gray would suffice. Regarding "Case Size". Nah, that's not too important although I don't foresee a mini-ITX build making sense if I'm going to be cramming double digit amounts of TB in the system, Internal HDD's sounds better than a bunch of externals plugged in all the USB ports.
______________________
Q10) Do you need a copy of Windows included in the budget? If you do need one included, do you have a preference?**

A10) I don't know. If I do need a copy of Windows, I don't have one so that's something I'll have to consider I guess. I doubt that's a necessity though.
______________________
______________________
______________________
**Extra info or particulars:*\*

AND NOW TO THE FUN-STUFF... Here's a list of everything (PARTS PARTS PARTS) I have on-hand and ready to deploy into the wild &/or negotiate a trade/barter with:

CASES -
Corsair Carbide Series Air 540 Arctic White (Model# Crypto-Currency-9011048-WW) - (Probably my top pick for this build).
Cooler Master HAF XB EVO (This is probably my top 1st or 2nd pick for this build, the thing is a monster!).
Cooler Master Elite 130 - Mini ITX - Black
Cooler Master MasterBox 5 MID-Tower - Black & White
Raidmax Sigma-TWS - ATX - White
MasterBox Lite 5 - ATX - Black w/ diff. Colored accent attachments (included with purchase)
NZXT S340 Elite Matte White Steel/Tempered Glass Edition
EVGA DG-76 Alpine White - Mid Tower w/ window
EVGA DG-73 Black - Mid Tower w/ window (I have like 3 of these)

______________________
CPU's -
***7TH GEN OR BELOW INTEL's ("Code Name Class mentioned next to each one)**\*
Pentium G4400 (Skylake @54W TDP) - Intel ARK states is "ECC CAPABLE"
Celeron G3930 (Kaby Lake @ 51W TDP) - Intel ARK states is "ECC CAPABLE" :)
i5 6402P (Skylake @65W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i5 6600k (Skylake @ 91W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i7 6700 (Skylake @ 65W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i7 7700k (Kaby Lake @ 95W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(


***8TH GEN INTEL's **\*
i3-8350K (Coffee Lake @91W TDP) - Intel ARK states is "ECC FRIENDLY" :)
I5-8600K (Coffee Lake @95W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(


***AMD RYZEN's **\*
Ryzen 3 2200G
Ryzen 5 1600
Ryzen 7 1700X

______________________
MOTHERBOARDS -

***7TH GEN AND BELOW INTEL BASED MOBO'S - **\*
MSI Z170A-SLI
ASUS PRIME Z270-A
ASUS PRIME Z270-P
ASUS PRIME Z270-K
EVGA Z270 Stinger
GIGABYTE GA-Z270XP-SLI
MSI B150M ARCTIC
MSI B250M MICRO ATX (PRO OPT. BOOST EDITION)

***8TH GEN INTEL BASED MOBO'S - **\*
EVGA Z370 FTW
GIGABYTE Z370XP SLI (Rev. 1.0)
MSI Z370 SLI PLUS


***AMD RYZEN BASED MOBO'S - **\*
ASUS ROG STRIX B350-F GAMING
MSI B350 TOMAHAWK
MSI X370 GAMING PRO
ASROCK AB350M PRO4
______________________


RAM -

Way too many to list, nothing but 4 & 8GB DDR4 sticks and unfortunately, none are ECC so it's not even worth mentioning/listing these unless someone reading this is willing to barter. At which time I'd be obliged to send an itemized list or see if I have what they're/you're specifically looking for.\*
______________________
THERMAL APPLICATIONS/FANS -
JUST FANS -
BeQuiet -
Pure Wings 2 (80mm)
Pure Wings 2 (120mm)
Pure Wings 2 (140mm)
Silent Wings 3 PWM (120mm)

NOCTUA -
PoopBrown - NF-A20 PWM (200mm) Specifically for the BIG "CoolerMaster HAF XB EVO" Case
GREY - NF-P12 Redux - 1700RPM (120mm) PWM
Corsair -
Air Series AF120LED (120mm)

CPU COOLING SYSTEMS -
NOCTUA -
NT-HH 1.4ml Thermal Compound
NH-D15 6 Heatpipe system (this thing is the tits)

EVGA (Extremely crappy coding in the software here, I'm like 99.99% these will be problematic if I were to try and use in any OS outside of Windows, because they barely ever work in the intended Windows as it is).
CLC 240 (240mm Water-cooled system
CRYORIG -
Cryorig C7 Cu (Low-Profile Copper Edition*)

A few other oversized CPU cooling systems I forget off the top of my head but a CPU cooler is a CPU cooler after comparing to the previous 3 models I mentioned.
I almost exclusively am using these amazing "Innovation Cooling Graphite Thermal Pads" as an alternative to thermal paste for my CPU's. They're not cheap but they literally last forever.

NZXT - Sentry Mesh Fan Controller
______________________
POWER SUPPLIES (PSU's) -
BeQuiet 550W Straight Power 11 (GOLD)

EVGA -
750P2 (750W, Platinum)
850P2 (850W, Platinum)
750T2 (750W, TITANIUM - yeah baby, yeah)

ROSEWILL -
Quark 750W Platinum
Quark 650W Platinum

SEASONIC -
Focus 750W Platinum
______________________
STORAGE -
HGST Ultrastar 3TB - 64mb Cache - 7200RPM Sata III (3.5)
4X Samsung 860 EVO 500GB SSD's
2X Team Group L5 LITE 3D 2.5" SSD's 480GB
2X WD 10TB Essential EXT (I'm cool with shucking)
+ 6X various other external HDD's (from 4-8TB) - (Seagate, WD & G-Drives)
______________________

Other accessories worth mentioning -
PCI-E to 4X USB hub-adapter (I have a dozen or so of these - might not be sufficient enough &/or needed but again, 'worth mentioning' in case I somehow ever run out of SATA & USB ports and have extra external USB HDD's. Although, I'm sure there would be better suited components if I get to that point that probably won't cost all that much).
______________________
______________________
______________________
Needless to say, I have at least 1X of everything mentioned above. In most all cases, I have multiples of these items but obviously won't be needing 2X CPU's, Cases, etc...

Naturally, I have GPU's. Specifically;

At least 1X of every. Single. NVIDIA GTX 1070 TI (Yes, I have every variation of the 1070 ti made by MSI, EVGA and Zotac. The only brand I don't have is the Gigabyte line. My partners have terrible experience with those so I didn't even bother. I'm clearly not going to be needing a GPU for this build but again, I'm cool with discussing the idea of a barter if anyone reading this is in the market for one.

I also have some GTX 1080 TI's but those are already spoken for, sorry.

It's my understanding that select CPU's I have on this list are ECC Friendly and AFAIK, only 1 of my MOBO's claims to be ECC Friendly (The ASROCK AB350M PRO4), but for the life of me, I can't find any corresponding forums that confirm this and/or direct me to a listing where I can buy compatible RAM. Just the same, if I go w/ the ASROCK MOBO, that means I'd be using one of the Ryzens. Those are DEF. power hungry little buggers. Not a deal-breaker, just hoping to find something a little more conservative in terms of TDP.


In closing, I don't really need someone to hold my hand with the build part as much as figuring out which motherboard, CPU and RAM to get. Then I'm DEFINITELY going to need some guidance on what OS is best for my desired purpose. If building 2X Rigs makes sense, I'm totally open to that as well...
Rig 1 = EPIC NAS SYSTEM
Rig 2 = EPIC PFSENSE (or the like) DEDICATED FIREWALL

Oh, I almost forgot... The current routers I'm using are...
1X Netgear Nighthawk 6900P (Modem + Router)
1X Netgear Nighthawk X6S (AC 4000 I believe - Router dedicated towards my personal devices - no IoT &/or Guests allowed on this one)
1X TP-Link Archer C5 (Router). Total overkill after implementing the Nighthawks but this old beast somehow has the best range, plus it has 2X USB ports so for now, it's dedicated towards my IoT devices.
---- I also have a few other Wi-Fi routers (Apple Airport Extreme & some inferior Netgear's but I can only allocate so many WiFi Routers to so many WiFi channels w/out pissing off my neighbors) On that note, I have managed to convince my neighbors to let me in their house/WiFi configuration so we all have our hardware locked on specific, non-competing frequencies/channels so everyone's happy. :)


Please spare me the insults as I insulted myself throughout this entire venture. Part of why I did this was because when I was a kid, I used to fantasize about building a 'DREAM PC' but could never afford such. To compensate for this deficiency, I would actually print out the latest and greatest hardware components on a word document, print the lists up & tape to wall (for motivation). I was C++ certified at the age of 14 and built my first PC when I was 7. At the age of 15 I abandoned all hope in the sector and moved on to other aspirations. This entire ordeal was largely based off me finally fulfilling a childhood fantasy. On that note = mission accomplished. Now if I'm actually able to fulfill my desires on this post, I'm definitely going to feel less shitty about blowing so much money on all this stuff over the last couple years.

TIA for assisting in any way possible. Gotta love the internets!


THE END.
:)

EDIT/UPDATE (5 hours after OP) - My inbox is being inundated with various people asking for prices and other reasonable questions about my hardware being up for sale. Not to be redundant but rather to expound on my previous remarks about 'being interested in a bartetrade' with any of you here...

I did say I was going to sell my gear on eBay in the near future, I also said I wanted to trade/barter for anything relative to helping me accomplish my OP's mission(s). I'm not desperate for the $$$ but I'm also not one of those people that likes to rip other people off. That said; I value my time and money invested in this hardware and I'm only willing to unload it all once I've established I have ZERO need for any of it here in my home first. Hence my writing this lengthy thread in an attempt to repurpose at least a grand or two I've already spent.

One of the most commonly asked questions I anticipate receiving from interested bodies is going to be "How hard were you on your hardware?" Contrary to what anyone else would have probably done in my scenario which is say they were light on it whether they were or weren't, I documented my handling of the hardware, and have no problem sharing such documentation with verified, interested buyers (WHEN THE TIME COMES) to offer you guys peace of mind.

I have photo's and video's of the venture from A-Z. I am also obliged to provide (redacted) electricity bill statements where you can correlate my photo's (power draw on each rig), and also accurately deduct the excess power my house consumed with our other household appliances. Even taking into consideration how much (more) I spent in electricity from keeping my house at a constant, cool 70-72F year-round (via my Nest thermostat). Even without the rigs, I keep my AC @ 70 when I'm home and for the last 1.5-2 years, I just so happened to spend 85% of my time here at my house. When I would travel, I'd keep it at 72 for my wife & kids.
Additionally; I had each GPU 'custom' oveunderclocke'd (MSI Afterburner for all GPU's but the EVGA's).*
I doubt everyone reading this is aware so this is for those that don't.... EVGA had the brilliant idea of implementing what they call "ICX technology" in their latest NVIDIA GTX GPU's. The short(est) explanation of this "feature" goes as follows:

EVGA GPU's w/ "ICX 9 & above" have EXTRA HEAT/THERMAL SENSORS. Unlike every other GTX 1070 ti on the market, the one's with this feature actually have each of 2/2 on-board fans connected to individual thermal sensors. Which means - if you were to use the MSI Afterburner program on one of these EVGA's and create a custom fan curve for it, you'd only be able to get 1/2 of the fans to function the way intended. The other fan simply would not engage as the MSI Afterburner software wasn't designed/coded to recognize/ communicate with an added sensor (let alone sensor'S). This, in-turn, would likely result in whoever's using it the unintended way having a GPU defect on them within the first few months I'd imagine... Perhaps if they had the TDP power settings dumbed down as much as I did (60-63%), they might get a year or two out of it since it wouldn't run as near as hot, but I doubt any longer than that since cutting off 50% of the cooling system on one of these can't be ignored too long, surely capacitors would start to blow and who knows what else...
(Warning = RANT) Another interesting side-note about the EVGA's and their "Precision-X" OveUnderclocking software is that it's designed to only recognize 4X GPU's on a single system. For miners, that's just not cool. My favorite builds had 8X and for the motherboards that weren't capable of maintaining stable sessions on 8, I set up with 6X. Only my EVGA Rigs had 3 or 4X GPU's dedicated to a single motherboard. Furthermore, and as stated in an earlier paragraph, (& this is just my opinion) = EVGA SOFTWARE SUCKS! Precision X wasn't friendly with every motherboard/CPU I threw at it and their extension software for the CLC Close-Loop-Cooling/ CPU water-coolers simply didn't work on anything, even integrating into their own Precision-X software. The amount of time it took me to finally find compatible matches with that stuff was beyond maddening. (END RANT).
Which leads me to my other comments on the matter. That's what I had every single 1070 ti set at for TDP = 60-63%. Dropping the power load that much allowed me to bring down (on average) each 1070 ti to a constant 110-115W (mind you, this is only possible w/ "Titanium" rated PSU's, Platinum comes pretty damn close to the Titanium though) while mining Ethereum and was still able to maintain a bottom of 30 MH/s and a ceiling of 32 MH/s. Increasing the TDP to 80, 90, 100% or more only increased my hashrates (yields) negligibly, like 35-36 MH/s TOPS, which also meant each one was not only pulling 160-180W+ (Vs. the aforementioned 115'ish range), it also meant my rigs were creating a significantly greater amount of heat! Fortunately for the GPU's and my own personal habits, I live in South Florida where it's hot as balls typically, last winter was nothing like this one. Increasing my yields by 10-15% didn't justify increasing the heat production in my house by >30%, nor the added electricity costs from subjecting my AC handlers to that much of an extra work-load. For anyone reading this that doesn't know/understand what I'm talking about - after spending no less than 2-3 hours with each. and. every. one. I didn't play with the settings on just one and universally apply the settings to the rest. I found the 'prime' settings and documented them with a label-maker and notepad. Here's the math in a more transparent manner:

*** I NEVER LET MY GPU's BREACH 61C, EVER. Only my 8X GPU rigs saw 60-61 & it was the ones I had in the center of the build (naturally). I have REALLY high power fans (used on BTC ASIC MINERS) that were sucking air from those GPU's which was the only way I was able to obtain such stellar results while mining with them. **\*
Mining at "acceptable" heat temps (not acceptable to me, but most of the internet would disagree = 70C) and overclocking accordingly brings in X amount of yields per unit. =
'Tweaking' (underclocking) the GPU's to my parameters reduced my yield per unit from -10-15%, but it SAVED me well over 30-35% in direct electricity consumption, and an unknown amount of passive electricity consumption via creating approximately 20%+ less heat for my AC handler to combat.

I say all this extra stuff not just for anyone interested in mining with their GPU's, but really to answer (in-depth) the apparent questions you people are asking me in PM's. Something else that should help justify my claims of being so conservative should be the fact I only have/used "Platinum and Titanium" rated PSU's. Heat production, power efficiency and longevity of the hardware were ALWAYS my top priority.* . I truly thought Crypto would continue to gain and/or recover and bounce back faster than it did. If this project had maintained positive income for 12 months+, I'd have expanded one of our sites to also cater to GPU mining on a gnarly scale.

Once I have my NAS (& possibly 2nd rig for the firewall) successfully built, I'll be willing/able to entertain selling you guys some/all of the remaining hardware prior to launching on eBay. If there's something you're specifically looking for that I listed having, feel free to PM me with that/those specific item(s). Don't count on an immediate response but what you can count on is me honoring my word in offering whoever asks first right of refusal when the time comes for me to sell this stuff. Fortunately for me, PM's are time-stamped so that's how I'll gauge everyone's place in line. I hope this extra edit answers most of the questions you guys wanted to have answered and if not, sorry I guess. I'll do my best to bring light to anything I've missed out on after I realize whatever that error was/is. The only way anyone is getting first dibs on my hardware otherwise is if they either offer compelling insight into my original questions, or have something I need to trade w/.

THE END (Round#2)


submitted by Im-Ne-wHere to buildapcforme [link] [comments]

How Are Mining Profits Now? September 2019 Crypto Mining Rig 226 Mh/s 3.300 H/s (XMR), 140 MH/s (ETH) Mining Rig im Selbstbau ... 13 GPU Mining Rig Update - 192 Mh/s @ 1075W - Asrock H110 ... 1400 Mh/s Ethereum Linzhi ASIC Miner Now Starting Production

A GPU, or graphics processing unit, is responsible for the digital rendering in a computer system. Due to a GPU's power potential vs. a CPU, or central processing unit, they have become more ... Durch Bitcoins Mining können Sie Einheiten der virtuellen Bitcoin-Währung erhalten. Mit entsprechendem finanziellen Aufwand kann so jeder Computer-Besitzer nebenbei Geld verdienen. Wie das geht und was Sie dabei beachten sollten, erklären wir Ihnen in unserem Ratgeber. Mit einem GPU-Takt von nur 705 MHz berechnet die Radeon-Grafikkarte jedoch immer noch hohe 20,4 MH/s, wird also nur um 15 Prozent langsamer. Gleichzeitig benötigt die Grafikkarte jedoch nur noch ... As a result when using Windows the first GPU takes something like 140-150 MB more video memory on top of the other ones that are just mining, so with that the actually used video memory gets closer to the 4GB limit and instead of 20-30 MH/s you might be getting just 1-2 MH/s for the first GPU and soon it might even stop working. The GPU is the chip that enables graphics cards (often called GPUs for brevity in mining circles) to perform millions of repetitive calculations at the same time so that games can be rendered in real time. They are also used to render special effects, or for machine learning and artificial intelligence. Whereas an ASIC is purpose made to mine a single algorithm, a GPU is capable of mining ...

[index] [29337] [50703] [23475] [4237] [42623] [19056] [34468] [41363] [47766] [15799]

How Are Mining Profits Now? September 2019

earn free bitcoin online, earn free bitcoins online free earn bitcoin best way to earn bitcoins for free, bitcoin miner hosting cloud mining bitcoin, free bitcoin cloud mining, bitcoin cloud ... GPU Giveaway Enter Here! - https://www.youtube.com/watch?v=q8FY8GUmXc8 Buy This Efficient GPU For Mining! - https://geni.us/bqJ6vVH Need A Mining Motherboard... How to set UP BITCOIN Mining BY BITMAIN Antminer L3+ For Best Air Circulation - Duration: 3:22. Crypto BROS. 147,550 views. 3:22. 11 GPU Mining Rig @ 337 MH/s (MSI Radeon RX 580 Gaming X 8GB ... Buy This Efficient GPU For Ethhash/Other Algo Mining? - https://geni.us/0ipHLZM Enter In The GPU Giveaway! - https://www.youtube.com/watch?v=q8FY8GUmXc8 Linz... 5 R9 290 ATI graphic cards mining litecoin at ~ 4 MH/S stable. Mine dogecoin, litecoin or any scrypt coin with this gpu mining rig.

#